The Snap Charge iPad charging locker is designed for the simultaneous USB charging of up to six iPads, tablets, cell phones or other mobile devices. Each locker has six doors (3 high by 2 wide). Each locker compartment has a customized USB cable to charge device. The locker unit is wall mounted with pre-punched holes for easy installation and side-to-side connection. The standard locks have brass cores and proprietary non-commercial key blanks. All USB chargeable devices are easily attached to USB charging cable and are stored upright. Made in USA.

• Model: iPad/Tablet Charging Locker 2x3 (keyed)
  
  
• Manufacturer: Precision Locker Company, 181 Blackstone Avenue, Jamestown, NY 14701
  
  
• Model No: STG23-260430K
  
  
• Doors: 6
  
  
• Weight: 60 lbs (27.3 Kg)
  
  
• Application: Storage and USB charging locker for iPads, iPhones, tablets, and android cell phones
  
  
• General Description: Factory assembled steel locker with six (6) patron doors, welded construction, customized USB chargeable cable in each compartment. Vertical configuration: 2-wide x 3-high. Locker cabinet connects to 110V outlet. Concealed USB hub with six ports controls each locker compartment charging.
  
  
• Charging Specifications via USB hub:
  
• Input Ratings: Voltage 12V DC
  
• Power @ Full Load: 63.6 watts (5.3 amps)
  
• USB Output Ratings: Voltage 5V DC
  
• Current: Each port limited @ 2.3A
  
• Power: 6 ports @ 10W each = 60W total
  
  
• Dimensions (W x D x H): 26-1/4” (666 mm) x 4-1/4” (108 mm) x 31-3/8” (797 mm)
  
  
• Door Opening (W x H): 11-1/2” (292 mm) x 9” (229 mm)
  
  
• Material: Cold rolled prime steel
  
• Frame: 16 gauge
  
• Doors: 16 gauge
  
• Shelves/Body: 18 gauge
  
  
• Construction: Factory assembled; all welded, no protruding rivets, smooth outside surfaces; doors flanged with ground smooth corners; shelves welded and secured to body; hinges continuous, concealed, welded to frame and bolted to door; pry protection bar conceals cam.
  
  
• Locking System: Two (2) keys per compartment; proprietary non-commercial key blank; non-duplicating patron key combinations; brass lock housing and cylinder; chrome plated finish. Optional master keyed locking system. Lock and key replacement or exchange by Precision Locker Company only.
  
  
• Finish: Powder coat paint finish; standard color combinations are 2-tone brown (bronze/sand) and 2-tone gray (charcoal/silver). Architectural samples are available.
  
  
• Installation: Wall mount is recommended; pre-punched mounting holes in rear of unit for securing to wall; pre-punched holes in sides for horizontal ganging; owner to provide fasteners, anchors, brackets and other hardware of type and size appropriate for type of substrate.

HIGH SECURITY KEYED LOCKS
Our standard high security key locks come with 2 keys per lock and all doors are individually keyed.

MASTER KEYED LOCKS
The master keyed lock option provides individually keyed doors with the addition of a separate master key for management use. The master key will open all doors. We provide 2 keys per individual compartment plus 2 master keys per order. Additional master keys are available upon request.

KEYLESS COMBINATION LOCKS
The keyless combination lock option is a manual dial, 3-digit combination lock. This lock is designed for users to be able to set their own combination with ease. In a public setting, a combination can be set and used once. The compartment is then left open/unlocked for the next user to set their combination prior to locking. In a private setting, a combination can be set and used repeatedly. Simply re-lock the compartment without changing the combination code.

ELECTRONIC KEYPAD LOCKS
This option provides an electronic keypad which utilizes a 4-digit combination. This lock has three levels of codes – User, Sub-Master, and Master. It can be programmed for either public or private mode. In private mode, management sets a user code and the code can then be used repeatedly until changed again. In public mode, the user sets their own combination. This is a one-time use combination and upon use the compartment will remain unlocked until a new combination is set and the door is locked. Locks can be switched freely between modes by utilizing a Master or Sub-Master code. There is also a management key override in the event of lockouts. We provide 2 management keys per order. Additional management keys are available upon request. The locks are powered by a standard CR2450 battery and feature a low-battery indicator.